Please contact IBC for more information on any of the below or about sizes not listed as new sizes are constantly becoming available.

PARTS

- High Speed Spindles
- Precision Spindle Bearings
- Separator Rolls
- Nip Roll Bearings and Cots For Open-End & Air-Jet Spinning
- Precision Miniatures (Flanged and Unflanged)
- Specialty Rollers
- Specialty Pulleys
- Twin Disc Bearings
- Aircraft Type Bearings For Textiles
- Urethane Covered Bearings
- Textile Belting (V-belts, drive belts, timing belts)
- End Cap Bearings
- Flyer Bearings For Roving
- One Way Clutch Bearings
- Needle Bearings
- Cam Followers
- Rod Ends
- Linear Bearings
- Plastic Bearings
- Yoke Rollers IBC

Supplies Parts For The Following Machinery:
-Barmag
-Cherry
-Draper
-ICBT
-Matek
-Menegatto
-Monarch

-Murata
-Nissan
-OMM
-Reiter

-Roberts
-Saco Lowell

-Savio
-Schlafhorst
-Suessen
-Takatori
-Trutzschler
-Volkman
-Whitin

-Zinser

BARMAG: DW-90 DRAW WINDERS
= VR3690 SEPARATOR ROLL

FK-6 AND AFK DRAW TWISTERS
= BBYB 362744A MAIN SHAFT BEARING(260314/5) (FEED SHAFT)
= 608ZZ END CAP BEARING
= 608KDDB END CAP BEARING (BEVELED EDGE)
= 4965940/0 0R 388154/3 TOP ROLLER W/OUT COT
= 445397/2 (FK6-32-156Z, FK6-32-186Z) IDLER ROLLER
= 333564/2 (FK6-32-30Z) IDLER ROLLER
= 263328/1 (FK6-21-38) APRON ROLLER
= 333565/5 (FK6-32-35Z) IDLER ROLLER
= FK6-21-931Z, FK6-21-1044Z, FK6-21-1338Z TOP ROLLER W/COT
= 498083/8 (FK6-21-969Z) APRON ROLLER
= 465262/5 SEPARATOR ROLL
= 443432/8, 465262/5, 580928/8 SEPARATOR ROLL
= 703631/9 (FK6-32-381Z) TENSION PULLEY
= CA32681 (FK6-32-675) TENSION PULLEY
= 489802/1 (FK6-32-183Z)

WINDERS
= 206202/1 (6202)
= 206201/1 (6201)
= 206219/6 (6203)
= 465249/4
= 6003RSD
= 61812
= 130XL037 BELT

CHERRY: DX-500 AND DX-800 DRAW FRAMES

CROSROL
= 6205/C3

DREFT SPINNING
= 61900-ZZ
= 6000-ZZ
= 6001-ZZ

MARZOLI:
SPEEDFRAMES
= UL32-0023114 Bottom Roller Bearing

RINGFRAMES
= UL32-0036128 Bottom Roller Bearing
=  RAE 40 NPPB

COTTON SPINNING
= F-18636 INA Bottom Roller Bearing

ICBT: COVERING FRAMES
= 3202-2RS/C3

MENEGATTO/OMM: COVERING FRAMES
= 822ZZ SPINDLE BEARINGS
= 1026ZZ SPINDLE BEARINGS
= RZ-70-9 JOCKEY PULLEY

MURATA: MJS AIR-JET SPINNING
= MJS NIP ROLLER
= 608-ZZ

MURATA WINDERS
= 625-ZZ SKF

REITER: M0/5, M1/1, M2/1 SPINNING
= M/1/1 TOP ROLLER WITH OR W/OUT COT (11200372)
= M/2/1 TOP ROLLER WITH OR W/OUT COT (11200373)
= M/1/1, M/2/1 ROTOR SPINDLE
= M1/1, M2/1  OPENER ROLLER WITH OR WITHOUT WHARVE
= 100MM TENSION PULLEY (11100000)

DJ/5 RINGFRAME
= F-50995A INA Bottom Roller Bearing
= GRAE 45 NPPB

RL-10
= Combing Roller Bearing
= Nip Roller Bearing w/cot

RSB51/851/951
= TOP ROLLER WITH OR W/OUT COT AND GROOVE (3060.67, 3065.65, 3065.76) (BLACK, GREY, OR GREEN COT)
= STRIPPER BAR (3060.62)
= LEFT BEARING HOUSING (3065.70)
= RIGHT BEARING HOUSING (3065.69)

RU-04/11/14
= TOP ROLLER (4602-56-13E, 4603-1300-56, 4602-39-13E)
= TENSION PULLEY (4602-20-25E, 4603-2500-31)
= STUD BEARING (4603)
= OPENING ROLLER BEARING (4603-2000-30, 4603-2000-31)
= GUIDE ROLLER ( 4602-16-25E, 4603-2500-16)
= ROTOR ASSEMBLY SHAFT 11MM (4603-2500-39)
= ROTOR ASSEMBLY SHAFT 10MM (4602-10-25E)

ROBERTS: SPINNING
= B-10 BOTTOM SPINDLE BEARING
= B-11 TOP SPINDLE BEARING
= 20 MM Small Roller Bearing (Black Oxide)
= GW9103NRR BOTTOM ROLLER BEARING
= GW9104NRR BOTTOM ROLLER BEARING
= GW205NRR BOTTOM ROLLER BEARING

SACO LOWELL: HARTFORD SPINNING
= PS1KDD7 (4*4592-1) TOP SPINDLE BEARING
= PS3KDD (4*4593-1) BOTTOM SPINDLE BEARING

NEW ERA (SPIN-O-MATIC)
= 35KD4 (4*1346-1) TOP SPINDLE BEARING
= S3KL2 (4*1347-1) BOTTOM SPINDLE BEARING
UL32-0023114 Bottom Roller Bearing

ROV-O-MATIC
= 9113PPG FLYER BEARING
= BOBBIN CAP

VERSAMATIC
= 9100KRR2(4*1405-10) DRAW ROLL BEARING

SAURER-ALMA:
TWISTERS
= 61806-ZZ Spindle Bearing
= BSR 73 Tension Pulley

SAVIO: OPEN-END SPINNING
= NIP ROLL BEARING WITH OR W/OUT COT
= ZL2256-14NN3 ROTOR BEARING

SCHLAFHORST: SE-7, SE-8, SE-9
= NIP ROLL BEARING WITH OR W/OUT COT
= 608KDDB END CAP BEARING
= TENSION PULLEY
= 394651 BEARING

138,238, and 338 WINDERS
= 3804-2RS
= 3806-2RS L0201
= 624-ZZ
= 629-ZZ
= 626-ZZ

SCHLUMBERGER:
WORSTED SPINNING
UL40-0025408

TRUTZSCHLER:
CARDING
= GE 25, 35, 40, 50 KRRB
= RAE 40 NPPB
= GNE 50 KRRB

VOLKMAN:
VTS-05,06,07,08, & 09 TWISTERS
= 6205
= 6206
=  6305
=  51207
=  NKI 20/20
=  NKI 30/20
=  16012
=  NU-308
=  6210
=  6211
=  6008
=  6208
=  16006
=  6006
=  6306
=  16010
=  6308
=  6208-2RS,
=  6006-ZZ
=  608-2RS
=  6000-2RS
=  6009-2RS
=  51105
=  51100
=  6209K-2RS-C3 Main Shaft Bearing
=  22210CCK
=  6314-2RS-C3
=  6005-ZZ
=  51103
=  203KRRZAG

WHITTIN: F1 SPINNING
= F-51737 MIDDLE ROLL BEARING
= K28x33x13DA Needle Cage For Bottom Roller Bearing F-51738

NW SPINNING
= F-32664 BOTTOM ROLLER BEARING
= 5001A171 MIDDLE ROLL BEARING
= 5001A181 TOP ROLL BEARING
= AJTT-31226

ZINSER; 720 DRAW FRAMES
= TOP ARBORS COMPLETE (3-720.54.3590 OR 3-720.54.3660)

317 SPINNING
= F-55574 INA Bottom Roller Bearing
= RUW 2130.22 INA Bottom Roller Bearing

RING SPINNING
= UL32-0019169 Bottom Roller Bearing
= UL30-0007871 Middle & Back Roller Bearing

DRAW TWISTERS
= SEPARATOR ROLLS